IBM IC35L020 Hard Drive Specifications - Page 143
In LBA mode this register contains current LBA bits 24-27. L=1
View all IBM IC35L020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
R The retry bit. If set to one, then retries are disabled. Input parameters from the device Sector Count The number of requested sectors not transferred. Sector Number The sector number of the transferred sector. (L=0) In LBA mode this register contains current LBA bits 0-7. (L=1) Cylinder High/Low The cylinder number of the transferred sector. (L=0) In LBA mode this register contains current LBA bits 8-15 (Low), 16-23 (High). (L=1) H The head number of the transferred sector. (L=0) In LBA mode this register contains current LBA bits 24-27. (L=1) It should be noted that the device internally uses 40 bytes of ECC data on all data written or read from the disk. The 4 byte mode of operation is provided via an emulation. It is recommended that for testing the effectiveness and integrity of the devices ECC functions that the 40 byte ECC mode be used. Deskstar 60 GXP Hard disk drive specification 129