IBM IC35L020 Hard Drive Specifications - Page 181

Self-test execution status

Page 181 highlights

15.32.12.4 Self-test execution status Bit Definition 0-3 Percent Self-test remaining. An approximate percentage of the self-test routine remaining until completion; given in ten percent increments. Valid values are 0 through 9 4-7 Current Self-test execution status 0 The self-test routine completed without error or has not been run 1 The self-test routine aborted by the host 2 The self-test routine interrupted by the host with a hard or soft reset 3 The device was unable to complete the self-test routine due to a fatal error or unknown test error 4 The self-test routine completed with unknown element failure 5 The self-test routine completed with electrical element failure 6 The self-test routine completed with servo element failure 7 The self-test routine completed with read element failure 15 The self-test routine in progress 15.32.12.5 Total time in seconds to complete off-line data collection activity This field tells the host how many seconds the device requires to complete the off-line data collection activity. 15.32.12.6 Off-line data collection capability Bit Definition 0 Execute Off-line Immediate implemented bit 0 S.M.A.R.T. Execute Off-line Immediate subcommand is not implemented 1 S.M.A.R.T. Execute Off-line Immediate subcommand is implemented 1 Enable/disable Automatic Off-line implemented bit 0 S.M.A.R.T. Enable/disable Automatic Off-line subcommand is not implemented 1 S.M.A.R.T. Enable/disable Automatic Off-line subcommand is implemented 2 Abort/restart off-line by host bit 0 The device suspends off-line data collection activity after an interrupting command and resume it after some vendor specific event 1 The device aborts off-line data collection activity upon receipt of a new command 3 Off-line Read Scanning implemented bit 0 The device does not support Off-line Read Scanning 1 The device supports Off-line Read Scanning 4 Self-test implemented bit 0 Self-test routine is not implemented 1 Self-test routine is implemented 5-7 Reserved (0) Deskstar 60 GXP Hard disk drive specification 167

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209

15.32.12.4
Self-test execution status
15
The self-test routine in progress
7
The self-test routine completed with read element failure
6
The self-test routine completed with servo element failure
5
The self-test routine completed with electrical element failure
4
The self-test routine completed with unknown element failure
3
The device was unable to complete the self-test routine due to a fatal error or
unknown test error
2
The self-test routine interrupted by the host with a hard or soft reset
1
The self-test routine aborted by the host
0
The self-test routine completed without error or has not been run
Current Self-test execution status
4–7
Percent Self-test remaining.
An approximate percentage of the self-test routine remaining until completion; given in
ten percent increments. Valid values are 0 through 9
0–3
Definition
Bit
15.32.12.5
Total time in seconds to complete off-line data collection activity
This field tells the host how many seconds the device requires to complete the off-line data collection
activity.
15.32.12.6
Off-line data collection capability
Reserved (0)
5–7
1
Self-test routine is implemented
0
Self-test routine is not implemented
Self-test implemented bit
4
1
The device supports Off-line Read Scanning
0
The device does not support Off-line Read Scanning
Off-line Read Scanning implemented bit
3
1
The device aborts off-line data collection activity upon receipt of a new
command
0
The device suspends off-line data collection activity after an interrupting
command and resume it after some vendor specific event
Abort/restart off-line by host bit
2
1
S.M.A.R.T. Enable/disable Automatic Off-line subcommand is implemented
0
S.M.A.R.T. Enable/disable Automatic Off-line subcommand is not implemented
Enable/disable Automatic Off-line implemented bit
1
1
S.M.A.R.T. Execute Off-line Immediate subcommand is implemented
0
S.M.A.R.T. Execute Off-line Immediate subcommand is not implemented
Execute Off-line Immediate implemented bit
0
Definition
Bit
Deskstar
60 GXP Hard disk drive specification
167