IBM x3550 Installation Guide - Page 34
Configuration/Setup
UPC - 883436027151
View all IBM x3550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
you must install two identical DIMMs at a time, in the order shown in the following table, to maintain performance. Table 2. DIMM installation sequence Pair DIMM connectors 1 1 and 3 2 5 and 7 3 2 and 4 4 6 and 8 Figure 1. DIMM connectors, channels, and branches Channel 2 Channel 3 DIMM 5 connector DIMM 6 connector DIMM 7 connector DIMM 8 connector Branch 1 DIMM 1 connector DIMM 2 connector DIMM 3 connector DIMM 4 connector Branch 0 Channel 1 Channel 0 v Each DIMM in a pair must be the same size, speed, type, and technology to ensure that the server will operate correctly. v You can configure the server to use memory mirroring. Memory mirroring stores data in two pairs of DIMMs simultaneously. If a failure occurs, the memory controller switches from the active pair to the mirroring pair. Memory mirroring reduces the amount of available memory. Enable memory mirroring through the Configuration/Setup Utility program. When you use memory mirroring, you must install two pairs of DIMMs at a time. The four DIMMs in each group must be identical. See the following table for the installation sequence of DIMM connectors for memory mirroring. 20 IBM System x3550 Type 7978: Installation Guide