IBM x3550 Installation Guide - Page 70

Troubleshooting, tables, CD-RW/DVD, drive, problems

Get IBM x3550 - System - 7978 PDF manuals and user guides
UPC - 883436027151
View all IBM x3550 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

Troubleshooting tables Use the troubleshooting tables to find solutions to problems that have identifiable symptoms. See the Problem Determination and Service Guide on the IBM System x Documentation CD for more detailed troubleshooting information. If you cannot find the problem in these tables, run the diagnostic programs (see "Running the diagnostic programs" in the Problem Determination and Service Guide). If you have just added new software or a new optional device and the server is not working, complete the following steps before using the troubleshooting tables: 1. Check the light path diagnostics LEDs (see "Light path diagnostics" on page 68). 2. Remove the software or device that you just added. 3. Run the diagnostic tests to determine whether the server is running correctly. 4. Reinstall the new software or new device. CD-RW/DVD drive problems v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See the parts listing in the Problem Determination and Service Guide on the IBM System x Documentation CD to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Symptom Action The CD-RW/DVD drive is not recognized. 1. Make sure that: v The IDE channel to which the CD-RW/DVD drive is attached (primary) is enabled in the Configuration/Setup Utility program. v All cables and jumpers are installed correctly. v The correct device driver is installed for the CD-RW/DVD drive. 2. Run the CD-RW/DVD drive diagnostic programs. 3. Reseat the following components: a. CD-RW/DVD drive b. CD-RW/DVD drive cable 4. Replace the following components one at a time, in the order shown, restarting the server each time: a. CD-RW/DVD drive b. CD-RW/DVD drive cable c. (Trained service technician only) System board The CD-RW/DVD is not working 1. Clean the CD-RW/DVD drive. correctly. 2. Run the CD-RW/DVD drive diagnostic programs. 3. Reseat the following components: a. CD-RW/DVD drive b. CD-RW/DVD drive cable 4. Replace the CD-RW/DVD drive. 56 IBM System x3550 Type 7978: Installation Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
Troubleshooting
tables
Use
the
troubleshooting
tables
to
find
solutions
to
problems
that
have
identifiable
symptoms.
See
the
Problem
Determination
and
Service
Guide
on
the
IBM
System
x
Documentation
CD
for
more
detailed
troubleshooting
information.
If
you
cannot
find
the
problem
in
these
tables,
run
the
diagnostic
programs
(see
“Running
the
diagnostic
programs”
in
the
Problem
Determination
and
Service
Guide
).
If
you
have
just
added
new
software
or
a
new
optional
device
and
the
server
is
not
working,
complete
the
following
steps
before
using
the
troubleshooting
tables:
1.
Check
the
light
path
diagnostics
LEDs
(see
“Light
path
diagnostics”
on
page
68).
2.
Remove
the
software
or
device
that
you
just
added.
3.
Run
the
diagnostic
tests
to
determine
whether
the
server
is
running
correctly.
4.
Reinstall
the
new
software
or
new
device.
CD-RW/DVD
drive
problems
v
Follow
the
suggested
actions
in
the
order
in
which
they
are
listed
in
the
Action
column
until
the
problem
is
solved.
v
See
the
parts
listing
in
the
Problem
Determination
and
Service
Guide
on
the
IBM
System
x
Documentation
CD
to
determine
which
components
are
customer
replaceable
units
(CRU)
and
which
components
are
field
replaceable
units
(FRU).
v
If
an
action
step
is
preceded
by
“(Trained
service
technician
only),”
that
step
must
be
performed
only
by
a
trained
service
technician.
Symptom
Action
The
CD-RW/DVD
drive
is
not
recognized.
1.
Make
sure
that:
v
The
IDE
channel
to
which
the
CD-RW/DVD
drive
is
attached
(primary)
is
enabled
in
the
Configuration/Setup
Utility
program.
v
All
cables
and
jumpers
are
installed
correctly.
v
The
correct
device
driver
is
installed
for
the
CD-RW/DVD
drive.
2.
Run
the
CD-RW/DVD
drive
diagnostic
programs.
3.
Reseat
the
following
components:
a.
CD-RW/DVD
drive
b.
CD-RW/DVD
drive
cable
4.
Replace
the
following
components
one
at
a
time,
in
the
order
shown,
restarting
the
server
each
time:
a.
CD-RW/DVD
drive
b.
CD-RW/DVD
drive
cable
c.
(Trained
service
technician
only)
System
board
The
CD-RW/DVD
is
not
working
correctly.
1.
Clean
the
CD-RW/DVD
drive.
2.
Run
the
CD-RW/DVD
drive
diagnostic
programs.
3.
Reseat
the
following
components:
a.
CD-RW/DVD
drive
b.
CD-RW/DVD
drive
cable
4.
Replace
the
CD-RW/DVD
drive.
56
IBM
System
x3550
Type
7978:
Installation
Guide