IBM x3550 Installation Guide - Page 53
Using, Adaptec, Configuration, Utility, program - downloads
UPC - 883436027151
View all IBM x3550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Use the Adaptec HostRAID Configuration Utility program to add RAID level-0 and level-1 functionality to the integrated Serial ATA controller (simple-swap SATA models). Be sure to use this program as described in this document. Use this program to perform the following tasks: v Configure a redundant array of independent disks (RAID) array v View or change the RAID configuration and associated devices When you are using the Adaptec RAID Configuration Utility program to configure and manage simple-swap SATA arrays, consider the following information: v The integrated Serial ATA controller with integrated SATA RAID (simple-swap SATA models) supports RAID level-0 and level-1 with the option of having a hot-spare drive. v You cannot use the ServerGuide Setup and Installation CD to configure the integrated Serial ATA controller with integrated RAID. v Hard disk drive capacities affect how you create arrays. Drives in an array can have different capacities, but the RAID controller treats them as if they all have the capacity of the smallest hard disk drive. v To help ensure signal quality, do not mix drives with different speeds and data rates. Using the Adaptec RAID Configuration Utility program Use the Array Configuration Utility to add RAID level-0 and level-1 functionality to the integrated Serial ATA (SATA) controller. This utility is a part of the BIOS code. For additional information about using the Adaptec RAID Configuration Utility program, see the documentation on the Adaptec HostRAID Support CD. If this CD did not come with the server, you can download it from http://www.ibm.com/ support/. Using the SATA HostRAID feature The instructions in this section are for using the Array Configuration Utility program to access and perform an initial RAID level-1 configuration. For additional information about using the Array Configuration Utility program to create, configure, and manage arrays, see the documentation on the Adaptec HostRAID Support CD. Configuring the controller: To use the Array Configuration Utility program to configure a RAID level-1 array, complete the following steps: 1. Turn on the server. 2. When the prompt Press