Icom IC-2300H Instruction Manual - Page 10

PANEL DESCRIPTION 1 ■ Function display 00 !8 !7 !6 !5 !4 !3 !2 !1 q w e r t y q FREQUENCY READOUT Shows the operating frequency, channel name, Set mode contents, and so on. • T he frequency decimal point blinks during a scan. (p. 30) • W hile the DTMF memory function is in use, "d" ap- pears in the 100 MHz digit. (p. 36) w TRANSMIT ICON ➥ Appears while transmitting. (p. 10) ➥ Blinks while transmitting with the One-Touch PTT function. (p. 11) e AUDIO MUTE ICON (p. 9) Appears when the Audio Mute function is activated. r NARROW MODE ICON (p. 43) Appears when the narrow FM mode is selected. t OUTPUT POWER ICONS (p. 11) Displays the selected transmit output power level. • T he "Mid-Low" power is not selectable in the Taiwan version. y KEY ICONS Displays the function(s) of the front panel keys di- rectly below the function display. u SKIP ICON (p. 32) Appears when the selected memory channel is set as a skip channel. i MEMORY CHANNEL NUMBER READOUT ➥ Displays the selected memory channel number. (p. 18) ➥ "C" appears when the Call channel is selected. (p. 27) o MEMORY ICON (p. 17) Appears when the Memory mode is selected. !0 S/RF INDICATOR ➥ Shows the relative signal strength, while receiving signals. (p. 8) ➥ Shows the output power level, while transmitting. (p. 10) !0 o i u 1 2 3 !1 BUSY ICON (p. 8) 4 ➥ Appears when receiving a signal, or the squelch is 5 open. ➥ Blinks while the monitor function is turned ON. 6 !2 S-METER SQUELCH ICON (p. 9) 7 Appears while the S-meter Squelch function is turned 8 ON. 9 !3 SQUELCH ATTENUATOR ICON (p. 9) 10 Appears while the Squelch Attenuator function is turned ON. 11 !4 PRIORITY WATCH ICON (p. 35) 12 Appears during Priority Watch. 13 !5 AUTO POWER OFF ICON (p. 47) Appears when the Auto Power OFF function is turned ON. !6 TONE ICONS ➥ The " " and " " icons appear while the subaudible tone encoder is in use. (p. 13) ➥ The " " and " " icons appear while the DTCS encoder is in use. (p. 13) ➥ The " " icon appears while the Tone Squelch (CTCSS) function is in use. (p. 41) ➥ The " " and " " icons appear while the Reverse Tone Squelch (CTCSS) function is in use. (p. 41) ➥ The " " icon appears while the Tone Squelch (DTCS) function is in use. (p. 41) ➥ The " " and " " icons appear while the Reverse Tone Squelch (DTCS) function is in use. (p. 41) ➥ The " " icon appears with the " " or " " icon, while the pocket beep function (CTCSS or DTCS) is in use. (p. 39) !7 DUPLEX ICONS (p. 12) The "+" icon appears in the plus duplex mode, and the "-" icon appears in the minus duplex mode. !8 LOCK ICON (p. 7) Appears while the Lock function is turned ON. 2