Icom IC-2300H Instruction Manual - Page 19

BASIC OPERATION 3 ■ Selecting output power 00 The IC-2300H has 4* output power levels to suit your operating requirements. Lower output powers during short-distance communications may reduce the pos- sibility of interference to other stations and will reduce current consumption. *The Taiwan version has only 3 output power level options. ➥ Push [LOW] one or more times to select the output power. • T he output power can be changed even while transmitting. MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz The selected output power is displayed here. 1 • OUTPUT POWER (approximately) (If "High" is selected, no icon is displayed.) 2 USA, Export Taiwan Korea 3 HHiigghh:: 65 W 24 W 50 W 4 MMiidd:: 25 W 10 W 25 W 5 MMiidd--LLooww:: 10 W - 10 W 6 LLooww:: 5 W 5 W 5 W 7 8 Using the HM-133V 9 ➥ Push [high] for high output power; [mid] 10 for mid-low output power (push again for mid output 11 power); and [low] for low output power. • W hen using the microphone, output power can be 12 changed only while receiving. 13 ■ One-touch PTT function The PTT switch can be operated as a one-touch PTT switch (each push switches between transmit and receive). Using this function you can transmit without holding down the PTT switch. To prevent accidental continuous transmissions with this function, the transceiver has a time-out timer. See page 48 for details. z Push [FUNC] then [PTT-M] to turn ON the One-Touch PTT function. • The activity indicator lights green. x Push [PTT] to transmit and push again to receive. • T wo beeps sound when transmit starts, and a long beep sounds when returning to receive. • T he "$" icon blinks while the One-Touch PTT function is ON. c Push [FUNC] then [PTT-M] to turn OFF the One-Touch PTT function. • The activity indicator goes out. MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz 11