Icom IC-2300H Instruction Manual - Page 7

QUICK REFERENCE GUIDE ■ Your first contact Now that you have your IC-2300H installed in your car or shack, you are probably excited to get on the air. We would like to take you through a few basic operation steps. 1. Turning ON the transceiver Before turning ON your IC-2300H, make sure the audio volume and squelch level controls are set to 9-10 o'clock. [VOL] [SQL] Set both [VOL] and [SQL] to the 9-10 o'clock position. Although you have purchased a brand new transceiver, some settings may have changed from the factory defaults because of the QC process. The Partial Rest is recommended to start with factory default settings. [ ] [SCAN] (V/MHz) ➥ While holding down [V/MHz], hold down [ ] for 1 second to reset the CPU. 2. Tune the desired frequency [DIAL] will allow you to set the frequency you want to operate on. Page 6 explains how to set the tuning speed. [DIAL] Using the HM-133V You can directly enter the frequency with the HM-133V keypad. [i.e.]: Setting the frequency to 145.3625 MHz. Push MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz Push Push MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz Push MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz ■ Repeater operation 1. Setting duplex Hold down [DUP] (LOW) for 1 second one or more times to select minus duplex or plus duplex. • T he USA version has an Auto Repeater function, therefore, setting duplex is not required. MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz 2. Repeater tone If accessing the repeater, requires a subaudible tone, push [TONE] one or more times until " " appears. MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz Using the HM-133V Plus or minus duplex selection and the repeater tone setting can easily be made using the HM-133V. Push [dup-] for minus duplex; [dup+] for plus duplex selection, then push [FUNC] , and then [dup-] to turn ON the repeater tone. Push MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz Push MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz Push , then MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz vi