Icom IC-2300H Instruction Manual - Page 9

q

POWER KEY [

]

Hold down for 1 second to turn power ON or OFF.

w

MEMORY WRITE KEY [S.MW MW] (p. 17)

➥

Push to enter the memory write mode.

➥

Hold down for 1 second to program a selected

memory channel.

• Continue to hold down the key to

automatically

increment the memory channels.

e

MICROPHONE CONNECTOR

Connect the supplied microphone here.

r

VOLUME CONTROL [VOL]

(p. 8)

Rotate to adjust the audio level.

t

SQUELCH CONTROL [SQL]

(p. 8)

Rotate to adjust the squelch level.

• The S-meter squelch or attenuator squelch is ac

-

tivated, when you rotate

[SQL]

clockwise from the

center position. (p. 9)

Squelch is

open.

Squelch attenuator

or

S-meter squelch

Squelch

threshold

Shallow

Deep

Noise squelch

y

SET•LOCK KEY [SET LOCK]

➥

Push to enter to the Set mode. (p. 43)

➥

Hold down for 1 second to turn the Lock function

ON or OFF. (p. 7)

u

MONITOR•CHANNEL NAME KEY [MONI ANM]

➥

Push to turn the monitor function ON or OFF. (p. 8)

➥

In the memory or Call channel mode, hold down

for 1 second to turn the channel names or num-

ber ON or OFF. (p. 21)

i

OUTPUT POWER•DUPLEX KEY [LOW DUP]

➥

Push to select the output power. (p. 11)

➥

Hold down for 1 second to select the minus du-

plex, plus duplex or simplex mode. (p. 12)

o

TONE•TONE SCAN KEY [TONE T-SCAN]

➥

Push to select the tone function. (pp. 39, 41)

➥

Hold down for 1 second to start the Tone Scan.

(p. 42)

!

0

MEMORY/CALL•PRIORITY KEY [M/CALL PRIO]

➥

Push to select and toggle memory, Call and

weather channel* modes. (pp. 18, 27, 50)

*For only USA versions.

➥

Hold down for 1 second to start the priority watch.

(p. 34)

!

1

VFO/MHz TUNING•SCAN KEY [V/MHz SCAN]

➥

Push to select the VFO mode. (p. 5)

• In the VFO mode, push to select the tuning step.

(p. 5)

➥

Hold down for 1 second to start a scan. (p. 29)

• Push to cancel the scan while scanning.

!

2

BANK•OPTION KEY [BANK OPT]

➥

Push to select the memory bank while in the

memory mode. (p. 23)

➥

Hold down for 1 second to enter the Option Set

mode. (p. 36)

!

3

TUNING DIAL [DIAL]

➥

Sets the operating frequency (p. 5), memory

channel. (p. 18)

➥

Sets the item in the Set mode. (p. 43)

➥

Changes the scanning direction. (p. 30)

D

Microphone connector

(front panel view)

q

i

q

+8 V DC output (Max. 35 mA)

w

Channel up/down

e

8 V control IN

r

PTT

t

GND (microphone ground)

y

MIC (microphone input)

u

GND

i

Data IN

S.MW

SQL

VOL

MW

BANK

OPT

Function display (p. 2)

!

0

o

i

u

y

q

w

e

r

t

!

3

!

1

!

2

1

PANEL DESCRIPTION

1

Front panel

■

Section	Page
Front cover	1
FOREWORD	2
IMPORTANT	2
EXPLICIT DEFINITIONS	2
SUPPLIED ACCESSORIES	2
OPTIONS	2
FCC INFORMATION	2
PRECAUTIONS	3
TABLE OF CONTENTS	4
QUICK REFERENCE GUIDE	5
■ Installation	5
Location	5
Using the mounting bracket	5
Battery connection	5
DC power supply connection	5
Antenna installation	6
Connecting the microphone	6
■ Your first contact	7
■ Repeater operation	7
■ Programming memory channels	8
1 PANEL DESCRIPTION	9
■ Front panel	9
■ Function display	10
■ Rear panel	11
■ Microphone (HM-133V)	11
■ Microphone keypad	12
2 SETTING A FREQUENCY	13
■ Preparation	13
■ Using the dial	13
■ Using the keypad on the HM-133V	13
■ Using [UP] or [DN] on the HM-133V	13
■ Tuning step selection	14
■ Lock functions	15
Lock function	15
Microphone Keypad Lock	15
3 BASIC OPERATION	16
■ Receiving	16
■ Monitor function	16
■ Audio mute function	17
■ Squelch attenuator	17
■ S-meter squelch	17
■ Transmitting	18
■ Selecting output power	19
■ One-touch PTT function	19
■ Accessing a repeater	20
■ Subaudible tones (Encoder function)	21
Subaudible tones	21
DTMF tones	22
1750 Hz tone	22
4 REPEATER SETTING	23
■ Frequency Offset	23
■ Repeater Lockout	23
■ Reversed Duplex function	24
■ Auto repeater (Only USA versions)	24
Setting the Auto Repeater function ON/OFF	24
Frequency range and offset direction	24
5 MEMORY OPERATION	25
■ General description	25
■ Programming a memory channel	25
■ Memory channel selection	26
Using the tuning dial	26
Using [UP] or [DN] on the HM-133V	26
Using the keypad on the HM-133V	26
■ Copying memory contents	27
Memory/Call channel➪VFO	27
Memory/Call channel➪Call/memory channel	28
■ Programming channel names	29
■ Memory clearing	30
■ Memory bank setting	31
■ Memory bank selection	32
■ Transferring bank links	33
■ Erasing bank links	34
6 CALL CHANNEL OPERATION	35
■ Call channel selection	35
■ Copying Call channel contents	35
■ Programming a Call channel	36
7 SCAN OPERATION	37
■ Scan types	37
■ Scan start/stop	38
Preparation	38
Operation	38
■ Scan edges programming	39
■ Skip channel setting	40
■ Scan Resume function	41
8 PRIORITY WATCH	42
■ Priority Watch types	42
■ Priority watch operation	43
9 DTMF MEMORY ENCODER	44
■ Programming a DTMF code	44
■ Transmitting a DTMF code	45
Automatic transmission (DTMF memory)	45
Transmitting a DTMF memory using theHM-133V	45
Manual transmission using the HM-133	45
■ DTMF TX speed	46
10 POCKET BEEP AND TONE SQUELCH	47
■ Pocket beep operation	47
Waiting for a call from the specific station	47
Calling a waiting station using pocket beep	48
■ Tone/DTCS squelch operation	49
■ Tone scan	50
11 OTHER FUNCTIONS	51
■ Set mode	51
■ Initial Set mode	55
Entering the Initial Set mode	55
■Weather channel operation (Only USA versions)	58
Weather channel selection	58
Weather alert function	58
■ Microphone keys	59
[F-1] and [F-2] keys on the HM-133V	59
[UP] and [DN] keys on a microphones other than the HM-133V	59
■ Partial reset	60
■ All Reset	60
■ Data cloning	61
Cloning between two transceivers	61
Cloning using a PC	61
Cloning error	61
12 SPECIFICATIONS	62
13 MAINTENANCE	63
■ Troubleshooting	63
■ Fuse replacement	63

Icom IC-2300H Instruction Manual - Page 9

PANEL DESCRIPTION, ■ Front panel - programming

Page 9 highlights