Icom IC-2300H Instruction Manual - Page 60

11 OTHER FUNCTIONS ■ Partial reset If you want to reset the VFO frequency, VFO settings and Set mode items to their default values, without clearing the memory contents, you can do a partial reset of the transceiver's CPU. ➥ While holding down [V/MHz], hold down [ ] for 1 second to turn ON the power. • The CPU is partially reset. ■ All Reset The function display may, at rare times, display erroneous information (for example when first applying power). This may be externally caused by static electricity or other factors. In such case, first turn OFF the power, wait a few seconds, then turn ON the power again. If the problem persists, perform the following procedure. IMPORTANT!: All Rest CLEARS all memory contents and resets all values in the CPU to default. A Partial Reset can also be done that will not clear memory content, but may not solve the problem. q Turn OFF the power, if the transceiver is ON. w  W hile holding down [SET] and [S.MW], hold down [ ] for 1 second to turn ON the power. • The transceiver is totally reset. [ ] [SCAN] (V/MHz) MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz [ ] [LOCK] (SET) [MW] (S.MW) MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz 52