Icom IC-2300H Instruction Manual - Page 41

7 SCAN OPERATION ■ Scan Resume function Various pause and timer options can be selected with the Scan Resume function. The selected resume option is also used for Priority Watch. (p. 35) q Push [SET] to enter the Set mode. w Push [SET] or [MONI] until "SCT" or "SCP" ap- pears. e Rotate [DIAL] to set the desired timer: • "SCP-2"-"SCP-20" : T he scan pauses for 2 to 20 seconds, when a signal is received. • "SCP-HO" : When a signal is received, the scan pauses until it disappears. • "SCT-0"-"SCT-5" : T he scan pauses, then re- sumes 0 to 5 seconds after the signal disappears. • "SCT-HO" : T he scan continues to pause, even if the signal disappears. r Push any keys other than [SET] or [MONI] to exit the Set mode.  DIGITAL PRIO AO BUSY When a signal is received, the MUTE NAR MID DIGITAL PRIO AO BUSY sWchaennpaaussiegsnaulntiisl irtedciseaivpepde,atrhse. LMOUWTE NLAORCK ANM DUP T-SCAN PRIO SCAN scan pauses until it disappears. MSIDET MONI LOW TONE M/CALL V/MHz LOW LOCK ANM DUP T-SCAN PRIO SCAN SET MONI LOW TONE M/CALL V/MHz DIGITAL PRIO AO BUSY The scan will resume 5 seconds MUTE NAR MID DIGITAL PRIO AO BUSY aTfhteersthcaensiwgnillarledsisuampepe5asrse.conds LMOUWTE NLAORCK ANM DUP T-SCAN PRIO SCAN after the signal disappears. MSIDET MONI LOW TONE M/CALL V/MHz LOW LOCK ANM DUP T-SCAN PRIO SCAN SET MONI LOW TONE M/CALL V/MHz Using the HM-133V z Push [set] to enter the Set mode. x Push [set] or [ent] until "SCT" or "SCP" appears. c Push [Y] or [Z] to select the scan resume option. • See step e above for details. v Push [clr] to exit the Set mode. N OTE: The Set mode cannot be accessed when memory names are displayed. To set the scan resume option, return to the frequency display by holding down [MONI] (ANM) on the front panel for 1 second, or push [FUNC] then [moni] (on the HM-133V) to cancel the channel name display, and then set the option as described on above. 33