Icom IC-2300H Instruction Manual - Page 8

QUICK REFERENCE GUIDE ■ Programming memory channels The IC-2300H has a total of 207 memory channels for storing often used operating frequencies, repeater settings, and so on. Memories include 6 scan edges and 1 Call channel. 1. Setting the frequency In the VFO mode, set the desired operating frequency, repeater, tone and tuning steps, and so on. 2. Selecting the memory channel Push [S.MW], and then rotate [DIAL] to select the desired memory channel. • The " " icon and memory channel number blink. 3. Writing a memory channel Hold down [MW] (S.MW) for 1 second to program. • 3 beeps sound • T he memory channel number automatically increases when continuing to hold down [MW] (S.MW) after programming. [S.MW] (MW) MUTE NAR MID LOW LOCK SET [DIAL] ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz Using the HM-133V q In the VFO mode, set the desired operating frequency, offset and direction, tone settings, and so on. w Push [FUNC] then [MW] . • The " " icon and memory channel number blink. e Push [Y] or [Z] to select the desired memory channel. r Push [FUNC] then hold down [MW] for 1 second to save the setting. • 3 beeps sound • T he memory channel number automatically increases when you continuing to hold down [MW] after programming. Push then , MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz Vii