Icom IC-2300H Instruction Manual - Page 20
■ Accessing a repeater
View all Icom IC-2300H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3 BASIC OPERATION ■ Accessing a repeater q Set the receive frequency (repeater output frequency). (p. 5) • F or only USA versions: When the Auto Repeater function is set to "R1" (p. 16), steps w and e are not necessary. When the Auto Repeater function is set to "R2" (p. 16), steps w to r are not necessary. w Set the frequency offset in the Set mode. (p. 15) e Hold down [DUP] (LOW) for 1 second, once or twice, to select the minus duplex or the plus duplex mode. • T he "-" or "+" icon appears to represent the fre- quency offset direction. r Push [TONE] one or more times to turn ON the sub- audible tone encoder, depending on the repeater requirements. • The " " icon appears • T he 88.5 Hz tone frequency is set as the default. But some repeaters may require a different tone frequency to access. Refer to page 13 for setting the tone frequency. t Hold down [PTT] to transmit. • T he displayed frequency automatically changes to the transmit frequency (repeater input frequency). • If "OFF" appears, confirm that the frequency offset is correctly set. (p. 15) y Release [PTT] to receive. u Push [MONI] to check whether you can directly receive the signal from the other station. i To return to the simplex mode, hold down [DUP] (LOW) for 1 second, once or twice, to clear the "-" or "+" icon. o To turn OFF the subaudible tone encoder, push [TONE] one or more times until no tone icon appears. [i.e.]: Select the minus duplex mode, and then turn ON the subaudible tone encoder. Appears. DIGITAL PRIO AO BUSY Push [DUP] (LOW) MUTE NAR to select the duplex mode. MID LOW LOCK ANM DUP T-SCAN PRIO SCAN SET MONI LOW TONE M/CALL V/MHz Appears DIGITAL PRIO AO BUSY Push [TONE] to turn ON MUTE NAR the subaudible tone encoder. MID LOW LOCK ANM DUP T-SCAN PRIO SCAN SET MONI LOW TONE M/CALL V/MHz MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz While transmitting (The displayed frequency changes to the transmit frequency) MUTE NAR MID LOW LOCK SET ANM MONI DUP LOW While receiving DIGITAL PRAIOO BUSY T-SCAN TONE PRIO M/CALL SCAN V/ MHz Using the HM-133V z Set the receive frequency (repeater output frequency). (p. 5) x Set the frequency offset in the Set mode. (p. 15) c Push [dup-] to select the minus duplex mode, or push [dup+] to select the plus duplex mode. v Push [FUNC] then [TONE] to turn ON the subaudible tone encoder, depending on the repeater requirements. • Refer to page 13 for setting the tone frequency. • W hen the repeater requires a different tone sys- tem, see page 14. b Hold down [PTT] to transmit. n Release [PTT] to receive. m Push [moni] to check whether you can directly receive the signal from the other station. , Push [simp] to return to the simplex mode. • The "+" or "-" icon disappears. . To turn OFF the subaudible tone encoder, push [FUNC] then [T-OFF] . 12 [i.e.]: Select the plus duplex mode, and then turn ON the subaudible tone encoder. Appears Push MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz Push then Appears , MUTE NAR MID . LOW LOCK SET ANM MONI DIGITAL PRIO AO BUSY DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz