Icom IC-2300H Instruction Manual - Page 18
■ Transmitting, IMPORTANT
View all Icom IC-2300H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
3 BASIC OPERATION ■ Transmitting CAUTION: Transmitting without an antenna will damage the transceiver. N OTE: To prevent interference, listen on the channel before transmitting by opening the squelch. To open the squelch, rotate [DIAL] counterclockwise or push [SQLZ] on the microphone. q Set the operating frequency. (p. 5) • Adjust the output power if desired. See page 11 for the details. w Hold down [PTT] to transmit. • The "$" icon appears. • The S/RF indicator shows the output power level. • T he One-Touch PTT function can be used. See page 11 for details. e Speak into the microphone at your normal voice level. • D O NOT hold the microphone too close to your mouth, or speak too loudly. This may distort the signal. r Release [PTT] to receive. Appears Output power level Selected output power MUTE NAR MID LOW LOCK SET ANM MONI DIGITAL PRIO AO DUP LOW T-SCAN TONE PRIO M/CALL SCAN V/ MHz IMPORTANT! (for 65 W transmission): The IC-2300H has a built-in current detector circuit which protects the power amplifier from excessive current flow. When excessive current flow is detected, the circuit automatically reduces the transmit output power to approximately 25 watts. The IC-2300H has a thermal detector circuit too, which protects the power amplifier from excessive heat. As the temperature increases, the circuit automatically reduces the transmit output power to approximately 10 to 20 watts. 10