Icom ID-52A Advanced Manual english - Page 114
Setting the GPS Alarm function to RX (a caller station), GPS Alarm, Information
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
6 GPS OPERATION (ADVANCED) GPS Alarm DDSetting the GPS Alarm function to RX (a caller station) [MENU] > GPS > GPS Alarm 1. Push [MENU]. 2. Select "GPS Alarm" in the "GPS" menu. 3. Select "Alarm Select." LLInformation •• When a station with its GPS Alarm set enters within an approximate 1 kilometer (1094 yards) range, it sounds once. When it enters within an approximate 500 meters (547 yards) range, the alarm sounds 3 times. •• When the transceiver sounds a GPS Alarm, "GPS ALARM" is displayed on the screen, and " " blinks. See the illustration below. •• To cancel the GPS Alarm function, select "OFF" in step 4 to the left. Blinks GPS ALARM 4. Select "RX." "GPS ALARM" is displayed on the screen and the alarm sounds 3 times. NOTE: Even if "RX" is selected in step 4, when the received signal has no position data, the GPS Alarm does not sound. TIP: When selecting "RX" or a specific GPS Memory in step 4 to the left, you also have to set the "Alarm Area (RX/Memory)" to use the GPS Alarm function. (p. 6-44) ([MENU] > GPS > GPS Alarm > Alarm Area (RX/Memory)) •• Returns to the GPS ALARM screen. LLIf you want to set the alarm to a specific GPS Memory group, select "Memory" and then select a GPS Memory in a GPS Memory group. LLTo exit the MENU screen, push [MENU]. 6-29