Icom ID-52A Advanced Manual english - Page 260
Connection, Step 2. Starting the RS-MS1A
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 260 highlights
17 OPTIONS Connecting an Android™ device to the transceiver through Bluetooth® DDConnection This section describes how to connect an Android device to the transceiver, using the RS-MS1A application. Before connecting, pair the transceiver with the Android device. (p. 17-7) LLWhen using the ST-4001A application, the transceiver and Android device are automatically connected while transferring a picture. Step 1. Preparing for the connection (Transceiver) [MENU] > SET > Function > CI-V > CI-V Transceive Set "CI-V Transceive" to ON to control the transceiver and the RS-MS1A with CI-V commands. Step 2. Starting the RS-MS1A (Android device) Touch the RS-MS1A to start. LLSee page 17-6 for details on downloading the RS-MS1A. Step 3. C onnecting to the transceiver (Android device) Touch the transceiver's Bluetooth unit name displayed on the RS-MS1A. •• Starts to connect. LLWhen your call sign has not been entered in the transceiver, you should enter it before you connect. LLAfter the connection has been made, the transceiver displays "MMM Connected.," and the Bluetooth icon is displayed. Displayed TIP: To connect to the Android device from the transceiver When the RS-MS1A is started on the Android device, you can connect to the device from the transceiver. [MENU] > SET > Bluetooth Set > Pairing/Connect 1. Push [MENU]. 2. Select "Bluetooth Set" in the SET menu. 3. Select "Pairing/Connect." 4. Select the Android device name displayed in the pairing list. 5. Select "YES." •• Displays "MMM Connecting..." ( "MMM" is the Bluetooth name of the Android device.) LLOn the PAIRING/CONNECT screen, " " is displayed on the data device icon. NOTE: If you cannot connect, check that the same CI-V address is set in the transceiver and the RSMS1A. You can see the CI-V setting as described below: Transceiver "CI-V Address" in the MENU screen. ([MENU] > SET > Function > CI-V > CI-V Address) (Default: A6) RS-MS1A: "Application Settings" → "CI-V settings" (Default: Transceiver[A6]) LLOn the PAIRING/CONNECT screen, " " is displayed. Device name Displayed while connecting 17-8