Icom ID-52A Advanced Manual english - Page 51

5 D-STAR OPERATION (ADVANCED) "TO" (Destination) setting DDUsing "Your Call Sign" The "Your Call Sign" memory saves individual or repeater station call signs. When you select the call sign for the "TO" (Destination) setting, you can make a Gateway call. When you call an individual station through a gateway, the signal is automatically sent to the last repeater that the individual station accessed. Therefore, even if you do not know where the individual station is located, you can make a call. NOTE: If the repeater, set in "FROM" (access repeater), has no Gateway call sign, you cannot make a gateway call. Example: Selecting "Rick" from "Your Call Sign." 1. Hold down [DR] for 1 second to display the DR screen. 2. Push D-pad() to select "TO," and then push [ENT]. DDUsing RX History When a call is received in the DV mode, the call data is saved in the RX History. Up to 50 callers, and only the last called call signs, a total of 51 histories can be saved. Example: Selecting "Rick" in the RX History. 1. Hold down [DR] for 1 second to display the DR screen. 2. Push D-pad() to select "TO," and then push [ENT]. 3. Select "RX History." 3. Select "Your Call Sign." 4. Select a destination name or call sign. 4. Select a destination name or call sign. •• Returns to the DR screen, and the selected name is displayed in "TO." LLThe "*" (asterisk) is displayed at the beginning of the called station's call sign. (p. 5-19) •• Returns to the DR screen, and the selected name is displayed in "TO." TIP: After selecting a destination, you can select another station preset in your transceiver by rotating [DIAL]. TIP: To add an RX HISTORY data to the "Your Call Sign" memory, push [QUICK], then select "Add To Your Memory." 5-10