Icom ID-52A Advanced Manual english - Page 23
Charging with a USB cable, BATTERY CHARGING
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3 BATTERY CHARGING Charging information DDCharging with a USB cable You can charge the battery pack with a USB cable (micro B type) while operating the transceiver. USB cable To the [USB] port To a USB port Power adapter or external battery (User supplied) PC, Mobile device NOTE: •• BE SURE to attach the battery pack to the transceiver. •• To use a mobile device or a PC as an external power source, set the following item to "ON" (default). ([MENU] > SET > Function > USB Power Input (Phone, Tablet, PC)) •• The battery pack is used as a power source while transmitting, even when an external power source is connected. Therefore, you cannot transmit if the battery pack is exhausted. •• You may not be able to charge: - Depending on your USB cable or power adapter. - When using a USB hub or connecting to a low output USB port. •• Charging time may differ, depending on the USB port. •• The S-meter may appear, or the noise may occur, due to the influence of the USB power supply's noise. In that case, unplug the USB cable to disconnect the transceiver from the USB power supply. •• When operating the transceiver while charging, the charging may not be sufficient, and the battery pack may be consumed, depending on the power adapter. TIP: •• When a USB cable is connected, the charging is stopped when the battery is fully charged. After that, the charging will resume when a certain amount of capacity is consumed while connecting the USB cable. •• You can change the operation when the transceiver is connected to a PC through a USB cable. ([MENU] > SET > Function > USB Connect) 3-4