Icom ID-52A Advanced Manual english - Page 119

6 GPS OPERATION (ADVANCED) GPS items Comment [MENU] > GPS > GPS TX Mode > D-PRS > TX Format > Object > Comment Enters a comment to transmit it with the D-PRS position data. You can enter up to four comments. The number of characters you can enter differs, depending on the Data Extension and Altitude settings. Data Extension OFF OFF Course/Speed Course/Speed Power/Height/Gain/Directivity Power/Height/Gain/Directivity Characters Altitude entered (maximum) - 43 (Default) Entered 35 - 36 Entered 28 - 36 Entered 28 The symbol " " displays the transmittable comment range. Please note that the characters that exceed the range will not be transmitted. Transmittable comment range display (Example: up to 28 characters) Position (Default: LATITUDE: 0°00.00′N, LONGITUDE:0°00.00′W, ALTITUDE: ------ft) [MENU] > GPS > GPS TX Mode > D-PRS > TX Format > Object > Position Displays the position information of the Object. Push [QUICK] to open the Quick Menu window shown below. TIP: When you select "Capture From GPS" or "Set From GPS Memory," you can capture the position from the GPS or set the Item's position from the GPS memory. Entering the position information manually 1. Select "Edit" on the Quick Menu window. •• The POSITION EDIT screen is displayed. 2. Select "LATITUDE." 3. Enter a latitude. LLSelect "N/S" to switch the north latitude and the southern latitude. 4. Select [ENT]. 5. Select "LONGITUDE." 6. Enter a longitude. LLSelect "E/W" to switch the east longitude and the west longitude. 7. Select [ENT]. 8. Select "ALTITUDE." 9. Enter an altitude. LLAfter entering, select [+/−] to switch "+" and "−." 10. Select [ENT]. 11. Select "." 12. Select "YES." •• The position information is entered. 6-34