Icom ID-52A Advanced Manual english - Page 227
Sending the picture
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
14 SHARE PICTURES FUNCTION Sending the picture Step 1. Selecting a picture to send LLYou can retransmit the picture in the TX PICT HISTORY screen. (p. 14-7) LLWhen you transfer the picture through Bluetooth, it is set to "TX Picture." If it is not necessary to change, go to "Step 2. Sending the picture." [MENU] > PICTURE 1. Push [MENU]. 2. Select "PICTURE." 3. Push D-pad() to select the TX Picture zone, and then push [ENT]. Step 2. Sending the picture 1. Push [QUICK]. 2. Select "Picture TX." 3. Select "Single TX" or "Repeat TX." 4. Push [ENT] again. 5. Select "TX Picture." Displayed while the Share Pictures function is ON. 4. Hold down [PTT] to transmit. LLThe picture is sent while transmitting. 5. Release [PTT] to receive. Sending a picture using the DV Fast Data function Select "" in step 2 to send a picture using the DV Fast Data function. 6. Rotate [DIAL] to select a picture. LLYou cannot view a picture if it is not in a supported format (p. 14-2), or is corrupted. 7. Push [ENT]. 8. Set "Picture Size," "Picture Quality," and "Receiver." LLSee page 14-6 about each setting item. 9. To close the TX PICTURE SET screen, push [MENU]. LLDO NOT select "" when you send a picture to other transceivers that can receive only slow speed data. LLWhile transmitting voice audio by holding down [PTT] on the microphone, the transceiver automatically changes to the Slow Speed Data mode. 14-5