Icom ID-52A Advanced Manual english - Page 63
EMR communication, Adjusting the EMR AF level
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
5 D-STAR OPERATION (ADVANCED) EMR communication The Enhanced Monitor Request (EMR) communication function can be used in only the DV mode. Using the EMR function, no call sign setting is necessary. LLInformation •• All transceivers that can receive an EMR signal automatically receive the signal. DO NOT use this function except in the case of an emergency. •• When an EMR signal is received, the audio (voice) is heard at the set level, even if the volume setting level is set to the minimum level. •• The EMR communication function is automatically turned OFF when you turn OFF the transceiver. [MENU] > SET > DV Set > EMR Example: Transmitting from the "Hirano" repeater using the EMR function. 1. Push [MENU]. 2. Select "DV Set" in the "SET" menu. DDAdjusting the EMR AF level The audio output level when an EMR signal is received is adjustable between 0 and 39. When an EMR signal is received, the audio is heard at the preset level, or the [VOL] control level, whichever is higher. To turn OFF the setting, set to "0." [MENU] > SET > DV Set > EMR AF Level 1. Push [MENU]. 2. Select "DV Set" in the "SET" menu. 3. Select "EMR AF Level." 3. Select "EMR." 4. Select "ON." 5. Push [MENU]. 4. Rotate [DIAL] to adjust the EMR audio output level between 0 (OFF) and 39 (maximum). (Default: 19) LLTo exit the MENU screen, push [MENU]. •• Returns to the Standby screen and "EMR" is displayed. Push [PTT]. •• The TX/RX indicator lights red while transmitting. LL"EMR" blinks on a station that receives the EMR signal. The audio (voice) is heard at the set level, or the [VOL] level, whichever is higher. LLTo cancel the EMR mode, select "OFF" in step 4, or turn OFF the transceiver. 5-22