Icom ID-52A Advanced Manual english - Page 52

5 D-STAR OPERATION (ADVANCED) "TO" (Destination) setting DDUsing TX History TX History saves the repeater and station name and call sign of up to 20 "TO" (Destination) settings used when you made the calls. NOTE: Until you make a call in the DV mode, you cannot select "TO" (destination) from the TX History. Example: S electing the "Kirkland (IA)" repeater in the TX History. 1. Hold down [DR] for 1 second to display the DR screen. 2. Push D-pad() to select "TO," and then push [ENT]. DDDirectly entering (UR) The destination station call sign can be directly entered. Example: Directly entering the call sign "JM1ZLK." 1. Hold down [DR] for 1 second to display the DR screen. 2. Push D-pad() to select "TO," and then push [ENT]. 3. Select "Direct Input (UR)." 3. Select "TX History." 4. Select a destination repeater. 4. Enter a call sign of up to 8 characters, including spaces. LLSee page iii on how to enter characters. 5. After entering, push [ENT]. The Sub name is displayed when a repeater is selected. •• Returns to the DR screen, and the selected repeater name is displayed in "TO." TIP: You can add the TX HISTORY data to memory, or delete it from the TX HISTORY screen. Push [QUICK], then select the option. •• Returns to the DR screen and the entered call sign is displayed in "TO." LLAfter entry, you can edit the call sign in the DIRECT INPUT (UR) screen. LLThe entered call sign remains on the DIRECT INPUT (UR) screen until you enter a new call sign. TIP: If the entered call sign is duplicated in the "Your Call Sign" memory, the name is displayed. (Only when the name has been entered.) 5-11