Icom ID-52A Advanced Manual english - Page 138

8 RECORDER FUNCTION Changing the QSO recorder settings You can change the recording settings. See pages 8-15 and 8-16 for details. Continue to record, even while the squelch is closed [MENU] > RECORD > QSO Recorder > Recorder Set > RX REC Condition Synchronize the recording to PTT [MENU] > RECORD > QSO Recorder > Recorder Set > PTT Auto REC LLThe default setting is "Squelch Auto" (Records only while the squelch is open). Record the QSO audio as one file [MENU] > RECORD > QSO Recorder > Recorder Set > File Split LLThe default setting is "ON" (Recording is synchronized to PTT). TIP: When "PTT Auto REC" is set to "ON" •• Starts recording not only when [PTT] is pushed, but also when switched to transmit by a speaker microphone or a Bluetooth headset, by a CI-V command, or by the VOX function. •• A signal that is received within 10 seconds after the squelch is closed is recorded in the same file. LLThe default setting is "ON" (transmit and receive audio are separately recorded in different files). LLWhen "RX REC Condition" is set to "Squelch Auto," an audio file is created every time the squelch opens. The received audio is recorded in a separated file. Separately start or stop recording on the selected band (MAIN band) [MENU] > RECORD > QSO Recorder > Recorder Set > REC Operation Change the Skip Time [MENU] > RECORD > QSO Recorder > Player Set > Skip Time LLThe default setting is "10sec." LLThe default setting is "A/B Link" (recording simultaneously starts on the MAIN and SUB bands). 8-4