Icom ID-52A Advanced Manual english - Page 171
About the Program Link Scan, Setting the Program Link function, Program Link
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
10 SCAN OPERATION VFO Scan DDAbout the Program Link Scan This item sets the Link function for 2 or more Program Scan ranges to sequentially scan during a Program Link scan. The Program Link scan scans all frequencies in the scan ranges. Example settings of the Program Link Program Scan Program Scan lower edge upper edge Program Link 0: Edit Name 01:144.000−440.000 Delete ... 1: Blank 9: Program Scan range (p. 10-7) Program Link number (0 to 9) LLInformation •• The Program Link Number screen displays the frequency range. •• You can add a Link setting by pushing [QUICK] when 2 or more Program Scan ranges (P-Scan Edge) are entered. •• When there is no Program Scan range (P00 ~ P24) entered, "Add" is not displayed after pushing [QUICK]. DDSetting the Program Link function [MENU] > SET > Scan > Program Link 1. Push [MENU]. 2. Select "Scan" in the "SET" menu. 3. Select "Program Link." 4. Select a Program Link number "0" ~ "9." •• The Program Link Number screen displays the preregistered Program Scan ranges. LLWhen no Program Scan range is selected, "- Blank -" is displayed. 5. Push [QUICK]. 6. Select "Add." 7. Select the Program Scan range that you want to add. 8. Repeat steps 6 and 7 until all Program scan ranges that you want are added. 9. Push [ENT] to save the Program Link. LLTo exit the MENU screen, push [MENU]. TIP: •• To edit the name of the Program Link, push [QUICK] and select "Edit Name" at above step 4. •• To delete the registered Program Scan range from the Program Link, select "Delete" at above step 6. 10-8