Home » Intel Manuals » Processors » Intel E2160 » Manual Viewer

Intel E2160 Design Guide - Page 48

A.2.5 Additional Considerations,

UPC - 735858199216

Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Intel® CoreTM 2 Duo E6400, E4300, and Intel® Pentium® Dual-Core E2160 Processor-LGA775 Socket Heatsink Loading Figure 19. Example: Defining Heatsink Preload Meeting Board Deflection Limit A.2.5 Note: Additional Considerations Intel recommends to design to {d_BOL - d_ref = 0.15mm} at BOL when EOL conditions are not known or difficult to assess. The following information is given for illustration only. It is based on the reference keep-out, assuming there is no fixture that changes board stiffness: d_ref is expected to be 0.18 mm on average, and be as high as 0.22 mm As a result, the board should be able to deflect 0.37 mm minimum at BOL. Additional deflection as high as 0.09 mm may be necessary to account for additional creep effects impacting the board/clip/fastener assembly. As a result, designs could see as much as 0.50mm total downward board deflection under the socket. In addition to board deflection, other elements need to be considered to define the space needed for the downward board total displacement under load, like the potential interference of through-hole mount component pin tails of the board with a mechanical fixture on the back of the board. 1. The heatsink preload must remain below the maximum load limit of the package at all times (Refer to processor datasheet). 2. Board deflection should not exceed motherboard manufacturer specifications. Intel® CoreTM 2 Duo E6400, E4300, and Intel® Pentium® Dual-Core E2160 Processor TDG 48 October 2007 Order Number: 315279 - 003US

Section	Page
Intel® CoreTM 2 Duo E6400, E4300, and Intel® Pentium® Dual-Core E2160 Processor: Thermal Design Guide	1
Contents	3
Figures	5
Tables	5
Revision History	6
1.0 Introduction	7
1.1 Document Goals and Scope	7
1.1.1 Importance of Thermal Management	7
1.1.2 Document Goals	7
1.1.3 Document Scope	7
1.2 References	9
1.3 Definition of Terms	9
2.0 Processor Thermal/Mechanical Information	11
2.1 Mechanical Requirements	11
2.1.1 Processor Package	11
2.1.2 Heatsink Attach	12
2.2 Thermal Requirements	14
2.2.1 Processor Case Temperature	14
2.2.2 Thermal Profile	15
2.2.3 Tcontrol	16
2.3 Heatsink Design Considerations	17
2.3.1 Heatsink Size	17
2.3.2 Heatsink Mass	18
2.3.3 Package IHS Flatness	18
2.3.4 Thermal Interface Material	18
2.4 System Thermal Solution Considerations	19
2.4.1 Chassis Thermal Design Capabilities	19
2.4.2 Improving Chassis Thermal Performance	19
2.4.3 Summary	19
2.5 System Integration Considerations	20
3.0 Thermal Metrology	21
3.1 Characterizing Cooling Performance Requirements	21
3.1.1 Example	22
3.2 Processor Thermal Solution Performance Assessment	23
3.3 Local Ambient Temperature Measurement Guidelines	23
3.4 Processor Case Temperature Measurement Guidelines	25
4.0 Thermal Management Logic and Thermal Monitor Feature	26
4.1 Processor Power Dissipation	26
4.2 Thermal Monitor Implementation	26
4.2.1 PROCHOT# Signal	27
4.2.2 Thermal Control Circuit	27
4.2.3 Thermal Monitor 2	28
4.2.4 Operation and Configuration	29
4.2.5 On-Demand Mode	30
4.2.6 System Considerations	30
4.2.7 Operating System and Application Software Considerations	31
4.2.8 THERMTRIP# Signal	31
4.2.9 Cooling System Failure Warning	31
4.2.10 Digital Thermal Sensor	31
4.2.11 Platform Environmental Control Interface (PECI)	32
5.0 Intel® Reference Thermal Solution	33
5.1 Thermal Solution Requirements	33
5.2 PICMG 1.3 Form Factor	34
5.3 ATX/BTX form factors	36
5.4 Altitude	36
5.5 Geometric Envelope for Intel Reference PICMG 1.3 Thermal Mechanical Design	37
6.0 Intel® Quiet System Technology (Intel® QST)	38
6.1 Intel® QST Algorithm	38
6.1.1 Output Weighting Matrix	39
6.1.2 Proportional-Integral-Derivative (PID)	39
6.2 Board and System Implementation of Intel® QST	41
6.3 Intel® QST Configuration and Tuning	43
6.4 Fan Hub Thermistor and Intel® QST	43
Appendix A LGA775 Socket Heatsink Loading	44
A.1 LGA775 Socket Heatsink Considerations	44
A.2 Metric for Heatsink Preload for Designs Non-Compliant with Intel Reference Design	44
A.2.1 Heatsink Preload Requirement Limitations	44
A.2.2 Motherboard Deflection Metric Definition	45
A.2.3 Board Deflection Limits	46
A.2.4 Board Deflection Metric Implementation Example	47
A.2.5 Additional Considerations	48
A.3 Heatsink Selection Guidelines	49
Appendix B Thermal Interface Management	50
B.1 Bond Line Management	50
B.2 Interface Material Area	50
B.3 Interface Material Performance	50
Appendix C Case Temperature Reference Metrology	51
C.1 Objective and Scope	51
Appendix D Mechanical Drawings	52