Intel SR1630HGP Service Guide - Page 117
Removing the Rack Handles, Removing the Rack Handle
![]() |
UPC - 735858211901
View all Intel SR1630HGP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Removing the Rack Handles 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information" on page iii. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. If it is installed, remove the front bezel. For instructions, see "Removing the Front Bezel" on page 28. 4. Remove the two screws holding the rack handle in place, and remove the rack handle from the server system as shown in Figure 78. AF001204 Figure 78. Removing the Rack Handle 5. Repeat Step 4 on the opposite side of the system. 6. (Optional) Install the front bezel, if desired. For instructions, see "Installing the Front Bezel" on page 29. 7. Plug all peripheral devices and the AC power cable into the server. Intel® Server System SR1630GP / SR1630HGP Service Guide 95
![](/manual_guide/products/intel-sr1630gp-service-guide-75d595d/117.png)