Intel SR1630HGP Service Guide - Page 83
Installing and Removing the PCIe* Riser Assembly, Removing the PCIe* Riser Assembly
UPC - 735858211901
View all Intel SR1630HGP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Installing and Removing the PCIe* Riser Assembly Caution: The PCIe* riser assembly is NOT hot-swappable. Before removing or replacing the PCIe* riser assembly, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. Removing the PCIe* Riser Assembly To remove the PCIe* riser assembly, use the following instructions. 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information" on page iii. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see "Removing the Server System Cover" on page 30. 4. Disconnect any cables attached to any add-in cards. 5. Lift riser assembly up to remove it. Use caution to gently ease the riser card from the add-in card slot so you do not damage the slot or the riser card. See Figure 50. A B AF003259 Figure 50. Removing PCIe* Riser Assembly from the Server System Intel® Server System SR1630GP / SR1630HGP Service Guide 61