Intel SR1630HGP Service Guide - Page 80
Installing or Removing a Slimline Optical Drive (SR1630HGP)
![]() |
UPC - 735858211901
View all Intel SR1630HGP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Installing or Removing a Slimline Optical Drive (SR1630HGP) Caution: The optical drive is NOT hot-swappable. Before removing or replacing the optical drive, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. Installing a Slimline Optical Drive (SR1630HGP) Note: The hardware necessary to install your optical drive was shipped to you in a bag labeled "CD-ROM Assy". 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information" on page iii. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see "Removing the Server System Cover" on page 30. 4. Remove the bezel if it is installed. For instructions, see "Removing the Front Bezel" on page 28. 5. First time installation only: Remove the peripheral knock-out by rocking it back and forth. 6. Attach the optical drive attachment bracket as shown in Figure 46. A AF001643 Figure 46. Attaching the Optical Drive to the Attachment Bracket 58 Intel® Server System SR1630GP / SR1630HGP Service Guide
![](/manual_guide/products/intel-sr1630gp-service-guide-75d595d/80.png)