Intel SR1630HGP Service Guide - Page 89
Removing a Full Height Add-In Card,
![]() |
UPC - 735858211901
View all Intel SR1630HGP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
5. Remove the screw at the rear of the riser assembly. See letter "A" in Figure 55. Save this screw. You will use it later. 6. Pull the add-in card from the socket in the riser assembly. You may need to wriggle the card from front to back to remove it, but use caution so you do not twist or bend the card. See letter "B" in Figure 55. 7. Install a filler panel over the opening at the rear of the riser assembly. See letter "C" in Figure 55. 8. Re-install the screw you removed in step 5. See letter "A" in Figure 55. C A B Riser Assembly Supports one PCIe* card. AF003287 Figure 55. Removing a Full Height Add-In Card Note: Make sure that all empty add-in card slots have filler panels installed. 9. Install the PCIe* Riser assembly into the server system. For instructions, see "Installing the PCIe* Riser Assembly" on page 62. 10. Install the processor air duct. For instructions, see "Installing the Processor Air Duct" on page 35. 11. Install the server system cover. For instructions, see "Installing the Server System Cover". 12. Plug all peripheral devices and the AC power cable into the server. Intel® Server System SR1630GP / SR1630HGP Service Guide 67
![](/manual_guide/products/intel-sr1630gp-service-guide-75d595d/89.png)