Intel SR1630HGP Service Guide - Page 46

2. Open the server chassis. 3. Move the jumper from the normal operation position, Password Clear Protect, at pins 1 and 2 to the Password Clear Erase position, covering pins 2 and 3 as indicated in the following diagram. Password Clear 2 J1F2 3 Default Password Clear AF003181 Figure 11. Password Recovery Jumper 4. Reconnect the AC power, power up the system. 5. Power down the system and disconnect the AC power. 6. Return the Password Clear jumper to the Password Clear Protect position, covering pins 1 and 2. 7. Reconnect the AC power and power up the server. 8. Close the server chassis. The password is cleared and can be reset by going into the BIOS setup. Clearing the CMOS If you cannot access the BIOS setup screens, you must use the CMOS Clear jumper to reset the configuration RAM. 1. Power down the system and disconnect the AC power. 2. Open the server chassis. For instructions, see your server chassis documentation. 3. Move the jumper from the default operating position (covering pins 1 and 2) to the reset / clear position (covering pins 2 and 3). 24 Intel® Server System SR1630GP / SR1630HGP Service Guide