Intel SR1630HGP Service Guide - Page 71
Removing Drive Carrier from the Server System SR1630GP
![]() |
UPC - 735858211901
View all Intel SR1630HGP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
4. Disconnect the power and data cables from the drive. 5. HDD1 location only: Slide the power cable from the cable clip located on the top of the hard drive carrier. 6. Remove the screw that holds the hard drive bracket to the chassis. See letter "A" in Figure 36. Save this screw. You will use it to reinstall the drive assembly later. 7. Lift the drive carrier from the chassis. See letter "B" in Figure 36. A B ChFarsosnist AF001050 Figure 36. Removing Drive Carrier from the Server System (SR1630GP) 8. Remove the four screws that attach the hard drive to the drive carrier. Lift the drive from the carrier. Store the drive in an anti-static bag. 9. If you are installing a new drive, skip the rest of these steps and instead see "Installing a Hard Disk Drive (SR1630GP)" on page 44, beginning with step 8. 10. Insert the screws that held the drive in the carrier into the screw locations on the carrier for future use. Intel® Server System SR1630GP / SR1630HGP Service Guide 49
![](/manual_guide/products/intel-sr1630gp-service-guide-75d595d/71.png)