Intel SR1630HGP Service Guide - Page 49

3 Hardware Installations and Upgrades Caution: No components in the Intel® Server System SR1630GP are hot-swappable. Before removing or installing any component in this server system, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. Note: Some components in the Intel® Server System SR1630HGP are hot-swappable and are noted as such (where applicable) in the following instructions. Note: Most of the illustrations in this chapter show the Intel® Server System SR1630GP with an optional optical drive installed. Unless otherwise noted, the instructions for removing and installing components are the same for the Intel® Server System SR1630HGP. When instructions differ, separate illustrations are shown for the Intel® Server System SR1630HGP. Before You Begin Before working with your server product, pay close attention to the "Safety Information" on page iii. Tools and Supplies Needed • Phillips* (cross head) screwdriver, #1 bit and #2 bit • Antistatic wrist strap and conductive foam pad (recommended) System References All references to the left, right, front, top, and bottom assume the reader is facing the front of the server system as it would be positioned for normal operation. Intel® Server System SR1630GP / SR1630HGP Service Guide 27