Intel SR1630HGP Service Guide - Page 84
Installing the PCIe* Riser Assembly, Installing PCIe* Riser Assembly into the Server System
UPC - 735858211901
View all Intel SR1630HGP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
6. If you need to add or replace a PCIe* Riser connector, see "Installing or Replacing a PCIe* Riser Card" on page 63. 7. If you need to add or replace a PCI add-in card, see "Installing and Removing a PCI Add-in Card" on page 65. 8. If you removed the PCIe* Riser assembly for another procedure, continue with that procedure. Installing the PCIe* Riser Assembly Note: For clarity, the figures in this series of instructions does not show an attached add-in card. If you are installing an add-in card, do so before installing the PCIe* riser assembly into your server system. 1. Lower the riser assembly into place over the add-in card slot. See letter "A" in Figure 51. 2. Align the three hooks in the riser assembly with the matching slots at the back of the server system. See letter "B" in Figure 51. B A AF003260 Figure 51. Installing PCIe* Riser Assembly into the Server System 3. Press down uniformly until the two hooks on the rear of the PCIe* riser assembly engage the server system back panel slots. The riser cards will seat into the matching sockets on the server board. 62 Intel® Server System SR1630GP / SR1630HGP Service Guide