Kenmore 1317 Installation Instructions - Page 9

dra,ntrapZJll

Get Kenmore 1317 - Pro 24 in. Dishwasher PDF manuals and user guides
UPC - 883049058658
View all Kenmore 1317 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Option2, Nowastedispose-r withairgap: 1. Cutend of drain hose if needed (do not cut ribbed section). 2. Attach drain hose to air gap with large spring-type clamp. If the drain hose was cut, use a 1-1/2" to 2" (3.8 to 5 cm) screw-type clamp s. 3. Use a rubber hose connector* with spring or screwtype clamps* to connect air gap to waste tee. This connection must be before the drain trap and at least 20" (50.8 cm) above the floor where dishwasher will be installed. j_ drain hose- __ cut here if needed rubber hose connector spn_g or large spring-type drain trap drain hose Insert drain hose through hole cut in cabinet to the front center of opening where drain connection will be made. drain hose _' Parts available from local plumbing supply stores Option 3, Waste disposer - no air gap: 1. Remove the disposer knockout plug. Do not cut end of drain hose. Attach drain hose to disposer type clamp. inlet with large spring- This connection must be before the drain trap and at least 20" (50.8 cm) above the floor where dishwasher will be installed. It is recommended that the drain hose be looped up and securely fastened to the underside of the counter. large spring-type clamp disposer inlet drain hose drain trap Insert drain hose through hole cut in cabinet to the front center of opening where drain connection will be made. drain hose Option 4, No waste disposer - no air gap: 1. Cut end of drain hose if needed (do not cut ribbed section). 2. Attach drain hose to waste tee with 1-1/2" to 2" (3.8 to 5 cm) screw-type clamp s. This connection must be before the drain trap and at least 20" (50.8 cm) above the floor where dishwasher will be installed. It is recommended that the drain hose be looped up and securely fastened to the underside of the counter. drain hose - _ cut here if needed _:J _ screw-type clamp _easte/ __ dra,ntrapZJll Insert drain hose through hole cut in cabinet to the front center of opening where drain connection will be made. drain hose Parts available from local plumbing supply stores Prepare dishwasher _ra_n Tip Over Hazard Do not use dishwasher until completely installed. Do not push down on open door.q Doing so can result in serious injury or cuts. Excessive Weight Hazard Use two or more people to move and install dishwasher. Failure to do so can result in back or other injury. Put corner posts from packaging behind dishwasher. Grasp sides of dishwasher door frame and put dishwasher on its back, resting on top of the corner posts.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Option2,Nowastedisposer
- withairgap:
1. Cut
end
of
drain
hose
if needed
(do
not
cut
ribbed
section).
2.
Attach
drain
hose
to
air
gap
with
large
spring-type
clamp.
If the
drain
hose
was
cut,
use
a 1-1/2"
to
2"
(3.8 to
5 cm)
screw-type
clamp
s.
3.
Use
a rubber
hose
connector*
with
spring
or
screw-
type
clamps*
to
connect
air
gap
to
waste
tee.
This
connection
must
be
before
the
drain
trap
and
at
least
20"
(50.8
cm)
above
the
floor
where
dishwasher
will
be
installed.
j_
drain hose-
__
cut here if needed
spn_g or
rubber hose
connector
large
spring-type
drain
drain trap
hose
Insert
drain
hose
through
hole
cut in
cabinet
to the front
center
of opening
where
drain
connection
will
be
made.
drain hose
_' Parts available
from
local
plumbing
supply
stores
Option
3, Waste
disposer
- no air
gap:
1.
Remove
the
disposer
knockout
plug.
Do not
cut
end
of
drain
hose.
Attach
drain
hose
to
disposer
inlet
with
large
spring-
type
clamp.
This
connection
must
be
before
the
drain
trap
and
at
least
20"
(50.8
cm)
above
the
floor
where
dishwasher
will
be
installed.
It is recommended
that
the
drain
hose
be
looped
up
and
securely
fastened
to
the
underside
of
the
counter.
large spring-type
clamp
drain hose
disposer
inlet
drain trap
Insert
drain
hose
through
hole
cut in
cabinet
to the front
center
of opening
where
drain
connection
will
be
made.
drain hose
Option
4,
No
waste
disposer
-
no
air
gap:
1.
Cut
end
of
drain
hose
if
needed
(do
not
cut
ribbed
section).
2.
Attach
drain
hose
to
waste
tee
with
1-1/2"
to
2"
(3.8
to
5 cm)
screw-type
clamp
s.
This
connection
must
be
before
the
drain
trap
and
at
least
20"
(50.8
cm)
above
the
floor
where
dishwasher
will
be
installed.
It
is
recommended
that
the
drain
hose
be
looped
up
and
securely
fastened
to
the
underside
of
the
counter.
drain hose -
_
cut here if needed
_:J
_
screw-type clamp
_easte
/
__
_ra_n
dra,ntrapZJll
Insert
drain
hose
through
hole
cut
in
cabinet
to
the
front
center
of
opening
where
drain
connection
will
be
made.
drain hose
Parts available from local plumbing supply stores
Prepare
dishwasher
Tip
Over
Hazard
Do
not
use
dishwasher
until
completely
installed.
Do
not
push
down
on
open
door.q
Doing
so
can
result
in serious
injury
or cuts.
Excessive
Weight
Hazard
Use
two
or more
people
to
move
and
install
dishwasher.
Failure
to
do
so
can
result
in back
or other
injury.
Put
corner
posts
from
packaging
behind
dishwasher.
Grasp
sides
of
dishwasher
door
frame
and
put
dishwasher
on
its
back,
resting
on
top
of
the
corner
posts.