Kenwood MDX-F1 User Manual - Page 22

Contents 22 Playback of Mini Disc MDX-F1 (EN) Listening in the desired sequence (program playback) Use the following procedure to program desired tracks in a desired order. (up to 32 tracks) Operation Select the "MD" input. (Also press the 7 to enter stop mode.) * 1 Let the "PGM" indicator light. Press in stop mode Lights PGM PGM ALL 3 REPEAT TRACK NO. --- 2 Select track numbers in the order you want to play them. 1 Select the track. 1 2 3 PGM ALL 3 REPEAT 4 5 6 7 8 9 007 PGM P-01 P-01 MD Program position of the track to be selected next. +10 0 (Go to step 2 within 8 seconds.) 2 Confirm the selection. PGM (To select more than one track, repeat steps 1 and 2 for each track.) Press the numeric keys as shown below.... To select track No. 23 : 003 To select track No. 40 : 0000) ÷ Up to 32 tracks can be programmed. When "FULL" is displayed, no more tracks can be programmed. ÷ If you made a mistake, press the CLEAR/DELETE key and enter the track No. again. ÷ When a track No. is entered, the track will be added to the end of the existing program. is displayed when the total programmed period has attained 100 minutes or more. 3 Start playback. To stop playback ÷ Tracks will be played in the order they were programmed MD 6 (following the program numbers). ÷ When the 4 or the ¢ key is pressed during play, the program will jump to the preceding or the following track respectively. ÷ When the 4 key is pressed once during playback, the play position returns to the beginning of the current track being played. To quit the program mode Clearing tracks from the end Press in stop mode CLEAR /DELETE Clearing all tracks PGM 7 STOP PGM ALL 3 REPEAT TRACK NO. --- P-02 Goes off PGM ALL 3 REPEAT (Example when the track in P-02 is canceled) ÷ Each time the key is pressed, the last track in the program is cleared. ÷ The entire program is cleared.