Kenwood MDX-F1 User Manual - Page 26

Contents 26 Receiving broadcast station It is also possible to receive them by one-touch operations by storing up to 40 stations in the preset memory. 1 2 MDX-F1 (EN) When the "TUNER FM/AM" key is pressed, the unit will automatically be switched on and reception status will be reached. 1 2 0 Operation 1 Select the broadcasting band by pressing the TUNER FM/AM key. TUNER FM/AM The first press of the key selects the tuner input. After this, each press switches the broadcasting bands alternately. 1 FM 2 AM Reception band indication 0 1 FM AUTO 8 9 0 0 MHz TUNER 2 Select the band. (The auto preset operation should be completed before this. ¶) To receive a preset station (Preset call) Main unit operation 4 ¢ Remote operation 4 P.CALL¢ The "TUNED" indicator lights when a station is received. Lights at the time of automatic station selection. Every time the key (4 or ¢) is pressed, the preset stations are switched over as follows. Press ¢ for the order of 1=2=3 ... 38=39=40=1... Press 4 for the order of 40=39=38 ... 3=2=1=40... 0 1 FM AUTO TUNED STEREO 8 9 0 0 MHz TUNER Lights during stereo reception Frequency display ÷ When a key is held depressed, preset stations will be skipped at an interval of about 0.5 second. ÷ Preset stations can be called using the numeric keys on the remote control unit. When no stations have been memorized Select the tuning mode according to the current radio wave condition. When the radio wave condition is good : Auto tuning mode (Stereo reception) When the radio wave condition is poor : Manual tuning mode (Monaural reception) 2Tune in a station. Auto tuning 4 ¢ : The next broadcasting sta- tion will be received automatically each time this key is pressed. 1Select the auto or manual tuning mode. STOP Each press alternates the mode. 7 1 Auto tuning ......... "AUTO" lit (Normally, use the Auto tuning mode.) 2 Manual tuning .... "AUTO" not lit Manual tuning : Press and hold until the de- sired station is received. ÷ Radio stations can also be tuned with the TUNING (1, ¡) keys of the remote control unit. (Go to step 2 within 5 seconds.)