Kenwood TM-281 Operation Manual - Page 17
Getting Acquainted+, FRONT PANEL
View all Kenwood TM-281 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
GETTING ACQUAINTED FRONT PANEL Note: This section describes only the main functions of the front panel controls. Explanations for functions not described here are provided in the appropriate sections of this instruction manual. : @ .;=B> q (Power) switch/ Volume control Press to switch the transceiver power ON or OFF {page 14}. Turn to adjust the level of the receive audio from the speaker {page 14}. w MENU button/ Tuning control Press to enter MHz Mode {page 16}. In this mode, you can change the operating frequency in 1 MHz steps using the Tuning control or Mic [UP]/[DWN]. Press and hold for 1 second while in VFO Mode to begin MHz Scan {page 41} or while in MR Mode to begin Group Scan {page 42}. Press [F] then press [MENU] to enter Menu Mode {page 18}. Turn to select: • Operating frequencies when in VFO Mode {page 15}. • Memory Channels when in Memory Recall Mode 3 {page 30}. • Menu Nos. when in Menu Mode {page 18}. • Scan direction while scanning {pages 27, 39, 47, 49}. e CALL key Press to recall the Call Channel {page 35}. Press and hold for 1 second while in VFO Mode to begin Call/ VFO Scan {page 43}. Press and hold for 1 second while in Memory Recall Mode to begin Call/ Memory Scan {page 43}. Press [F] then press [CALL] to activate the Tone {page 24}, CTCSS {page 46}, or DCS {page 48} function. r VFO key Press to enter VFO Mode {page 15}. In this mode, you can change the operating frequency using the Tuning control or Mic [UP]/[DWN]. Press and hold for 1 second while in VFO Mode to begin Band Scan {page 40}. Press and hold for 1 second while in VFO Mode after programming a scan range to begin Program Scan {page 40}. 9