Kenwood TM-281 Operation Manual - Page 41
Tuning, change in Memory Recall Mode.
View all Kenwood TM-281 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
MEMORY CHANNEL TRANSFER MEMORY \ VFO TRANSFER After retrieving frequencies and associated data from Memory Recall Mode, you can copy the data to the VFO. This function is useful, for example, when the frequency you want to monitor is near the frequency stored in a Memory Channel. 1 Press [MR], then turn the Tuning control or press Mic [UP]/[DWN] to recall the desired Memory Channel. • Alternatively, press [CALL] to select the Call Channel. 2 Press [F], [VFO] to copy the Memory Channel data to the VFO. Note: ◆ On odd-split channels, the above operation copies only the reception frequency to the VFO (not the transmission frequency). To copy the transmit frequency of an odd-split channel, press [REV] before performing the transfer. ◆ You can also transfer the Program Scan memory channels (L0/U0 ~ L2/U2), the Priority Channel (Pr), and the Weather Alert Channel (AL) (K market models only) to the VFO. ◆ Lockout status and Memory Names are not copied from a Memory Channel to the VFO. CHANNEL \ CHANNEL TRANSFER You can copy channel information from one Memory Channel to another. This function is useful when storing frequencies and associated data that you temporarily change in Memory Recall Mode. 1 Press [MR], then turn the Tuning control or press Mic [UP]/[DWN] to recall the desired Memory Channel. 2 Press [F]. 7 3 Select the Memory Channel where you would like the data copied by using the Tuning control or pressing Mic [UP]/[DWN]. 4 Press [MR]. 33