Kenwood TM-281 Operation Manual - Page 63
setting and exit S-Meter Level Select Mode.
![]() |
View all Kenwood TM-281 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
1 Press [F], [MENU] and turn the Tuning control to select Menu No. 8 (SSQ). 2 Press [MENU] and turn the Tuning control to select "ON" or "OFF" (default). 2 Press [MENU] and turn the Tuning control to select from OFF (default), 125, 250, and 500 ms. 3 Press [MENU] to store the setting. • The S-meter setting segments appear. 4 Press any key other than [MENU] to exit Menu Mode. 5 Press [F], [REV] to enter S-Meter Level Select Mode. 6 Turn the Tuning control to select your desired level. 7 Press any key other than [ ] (Power) to store the setting and exit S-Meter Level Select Mode. SQUELCH HANG TIME When using S-meter Squelch, you may want to adjust the time interval between when the received signals drop and when the squelch closes. 1 Press [F], [MENU] and turn the Tuning control to select Menu No. 9 (SQH). 3 Press [MENU] to store the setting or any other key to cancel. 4 Press any key other than [MENU] to exit Menu Mode. BEEP FUNCTION The Beep function provides confirmation of entry, error status, and malfunctions of the transceiver. We recommend you leave this function ON in order to detect erroneous operations and malfunctions. However, to turn the beep function OFF: 1 Press [F], [MENU] and turn the Tuning control to select Menu No. 24 (BP). 2 Press [MENU] and turn the Tuning control to select 11 "OFF". 55
![](/manual_guide/products/kenwood-tm281-operation-manual-d008936/63.png)