Kenwood TM-281 Operation Manual - Page 68
Narrow Band Fm Operation, Power-on Message, Select Menu No. 23 P.on.msg.
![]() |
View all Kenwood TM-281 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
NARROW BAND FM OPERATION By default, the transceiver operates in normal FM (±5 kHz) mode for both transmission and reception. You can also operate the transceiver in narrow band FM (±2.5 kHz). To operate the transceiver in narrow band FM: 1 Press [F], [MENU] and turn the Tuning control to select Menu No. 26 (FMN). 2 Press [MENU] and turn the Tuning control to select "ON" or "OFF" (default). POWER-ON MESSAGE You can change the Power-on message (a maximum of 6 characters) when the transceiver is turned ON. 1 Press [F], [MENU] and turn the Tuning control to select Menu No. 23 (P.ON.MSG). 2 Press [MENU]. • The current message and entry cursor appear. 3 Press [MENU] to store the setting or any other key to cancel. 4 Press any key other than [MENU] to exit Menu Mode. When narrow band FM operation is ON, "N" appears in 11 the top right of the LCD. 3 Turn the Tuning control to select a character. • You can enter the following alphanumeric characters: 0 ~ 9, A ~ Z, - (hyphen), / (slash), and a space. • Rather than using the Tuning control, you can use the Mic keypad (keypad models only) to enter alphanumeric characters {page 64}. 4 Press [MR] to move to the next digit. • To move to the previous digit, press [VFO]. To delete the character at the current cursor position, press [F]. 5 Repeat steps 3 and 4 to enter up to 6 digits. Note: You can store the narrow band FM operation status to the Memory Channels {page 29}. 60
![](/manual_guide/products/kenwood-tm281-operation-manual-d008936/68.png)