Kenwood TM-281 Operation Manual - Page 18
DISPLAY, MR key, REV key, F key
![]() |
View all Kenwood TM-281 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
In MR Mode, press [F] then press [VFO] to transfer the contents of the selected Memory Channel to the VFO {page 33}. t MR key Press to enter Memory Recall Mode {page 30}. In this mode, you can change memory channels using the 3 Tuning control or Mic [UP]/[DWN]. Press and hold for 1 second while in Memory Recall Mode to begin Memory Scan {page 42}. Press [F], use the Tuning control to select the desired channel, then press [MR] to reprogram the Call Channel or a Memory Channel {page 29}. y REV key Press to switch the transmit frequency and receive frequency when operating with an offset {page 23} or an odd-split Memory Channel {page 28}. Press [F] then press [REV] and rotate the Tuning control to increase or decrease the squelch level {page 14}. u /F key Press and hold for 1 second to lock the transceiver keys {page 58}. Press momentarily to access the second functions of the transceiver keys. DISPLAY 12 3 4 5 6 7 8 9 10 11 17 16 15 14 13 12 1 Appears when the CTCSS function is activated {page 46}. 2 Appears when the Tone function is activated {page 24}. 3 Appears when the DCS function is activated {page 48}. 4 Appears when the repeater shift function is activated {pages 23, 30}. (" " is not used on this transceiver.) 5 Appears when the Reverse function is activated {page 26}. 10
![](/manual_guide/products/kenwood-tm281-operation-manual-d008936/18.png)