Kenwood TM-281 Operation Manual - Page 66
LOCK FUNCTION, TUNE ENABLE, select Menu No. 27 ENC.
![]() |
View all Kenwood TM-281 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
LOCK FUNCTION The lock function disables most of the keys to prevent you from accidentally activating a function. Transceiver Lock is suitable for a typical mobile installation where you select most operations using the microphone. 1 Press [F] (1s). • " " appears when this function is ON. TUNE ENABLE While the Lock function is ON, you sometimes may want to turn the Tuning control to change the frequency. In this case, turn the Tune Enable function ON. 1 Press [F], [MENU] and turn the Tuning control to select Menu No. 27 (ENC). 2 Press [MENU] and turn the Tuning control to select "OFF" (default) or "ON". • The following keys cannot be locked: [ ] (Power), [F] (1s), [F]+[REV], Volume control, [PTT], and the Mic keypad. 2 Press [F] (1s) again to unlock the keys. Note: ◆ The Tuning control is also locked. To retain use of the Tuning control while the Lock function is ON, access Menu No. 27 (ENC) {below} and select "ON". ◆ You cannot reset the transceiver {page 67} while the Lock function is ON. 11 ◆ You cannot switch the transceiver operating mode by pressing [ ] (Power) + any key. ◆ Microphone PF keys {page 59} operate normally even if the Lock function is ON. 3 Press [MENU] to store the setting or any other key to cancel. 4 Press any key other than [MENU] to exit Menu Mode. 58
![](/manual_guide/products/kenwood-tm281-operation-manual-d008936/66.png)