Kenwood TM-281 Operation Manual - Page 44
Tuning, MENU], Select your local NOAA Weather Radio channel
![]() |
View all Kenwood TM-281 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Note: ◆ When you recall an odd-split Call Channel, "+" and "-" appear on the display. ◆ Transmit offset status and Reverse status are not stored in an odd-split Call Channel. WEATHER ALERT (K MARKET MODELS ONLY) Any of the NOAA Weather Radio channels can be programmed to the AL memory channel of the transceiver. The transceiver can be configured to check the NOAA Weather Alert tone (1050 Hz) and will automatically alert you by recalling and monitoring the Weather Radio frequency when the Weather Alert tone is broadcasted, and the "WX" icon will blink. 7 PROGRAMMING THE WEATHER RADIO FREQUENCY The transceiver is preprogrammed to 162.550 MHz (WX1). You can store a different frequency to the AL channel to use this function. Refer to the NOAA channel frequency directory for your local weather channel frequency before you use the Weather Alert function. The latest Weather Radio information can be obtained from https://www.nws.noaa.gov/nwr/. 1 Press [VFO]. 2 Select your local NOAA Weather Radio channel frequency using the Tuning control or Mic [UP]/[DWN]. 3 Press [F]. • A Memory Channel number appears and blinks. 4 Turn the Tuning control or press Mic [UP]/[DWN] to select the Alert Channel ("AL"). 5 Press [MR]. Weather Radio Frequencies (MHz) WX1 WX2 WX3 WX4 WX5 WX6 WX7 162.550 162.400 162.475 162.425 162.450 162.500 162.525 Note: ◆ When you perform Full Reset {page 63}, the Weather Radio frequency recovers the factory default frequency (162.550 MHz). ◆ When you clear the Weather Radio (AL) Channel {page 31} (the same as clearing a Memory Channel), the factory default frequency (162.550 MHz) will not be recovered. ◆ The Weather Radio (AL) Channel can be programmed with a Channel Name {page 32}. ◆ You can also transfer the AL Memory Channel data to the VFO or another Memory Channel. ENABLING A WEATHER ALERT You can monitor the Weather Radio frequency continuously or in the background while receiving on another frequency. To monitor the Weather Radio frequency continuously: 1 Press [F], [MENU] and turn the Tuning control to select Menu No. 42 (WXA). 2 Press [MENU] and turn the Tuning control to select "ON" or "OFF" (default). 3 Press [MENU] to store the setting. • "WX" appears on the display. 36
![](/manual_guide/products/kenwood-tm281-operation-manual-d008936/44.png)