Kenwood TM-V71A Operation Manual - Page 26
Selecting An Operating Mode
![]() |
View all Kenwood TM-V71A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
SELECTING AN OPERATING MODE There are 3 operating modes available to choose from: VFO mode, Memory Channel mode, and Call Channel mode. ■ VFO Mode VFO mode allows you to manually change the operating frequency. 1 Press [VFO] to enter VFO mode. 2 Rotate the Tuning control to select your desired operating frequency. • You can also adjust the frequency by using the microphone [UP]/[DWN] keys. • The default step frequency for the Tuning control varies according to the type and operating band: Type 144 MHz 430/440 MHz K 5 kHz 25 kHz E 12.5 kHz 25 kHz M4 10 kHz 10 kHz • To adjust the frequency by a larger amount, you can press the Tuning control to enter MHz mode. While in MHz mode, rotate the Tuning control to adjust the frequency in steps of 1 MHz. Press the Tuning control again to exit MHz mode and adjust the frequency using the normal step frequency. Using the MCP-2A (Memory Control Program), you can set the MHz mode step frequency to 10 MHz. Pressing the Tuning control will switch between 10 MHz, 1MHz, and off. ■ Memory Channel Mode Memory Channel mode allows you to quickly select a frequently used frequency and related data which you have saved in the transceiver memory. 1 Press [MR] to enter Memory Channel mode. 2 Rotate the Tuning control to select your desired Memory channel. 18
![](/manual_guide/products/kenwood-tmv71a-operation-manual-c7a4adb/26.png)