Kenwood TM-V71A Operation Manual - Page 76
S-meter Squelch, Advanced Intercept Point Aip
![]() |
View all Kenwood TM-V71A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
S-METER SQUELCH S-meter Squelch causes the squelch to open only when a signal with the same or greater strength than the S-meter setting is received. This function relieves you from constantly resetting the squelch when receiving weak stations that you have no interest in. 1 Enter Menu mode and access Menu 105 (S.SQL) {page 20}. 2 Set the S-Meter squelch to ON or OFF. 3 To select the desired S-meter setting, rotate the left (band A) or right (band B) SQL control depending on which band you have selected. • The squelch will open only at the level you have selected (for example, level 9). ■ Squelch Hang Time When using S-meter Squelch, you may want to adjust the time interval between when the received signals drop and when the squelch closes. 1 Enter Menu mode and access Menu 106 (S.SQ.HNG) {page 20}. 2 Set the hang time to 125, 250, or 500 ms, or OFF. ADVANCED INTERCEPT POINT (AIP) The VHF/UHF band is often crowded in urban areas. AIP helps eliminate interference and reduce audio distortion caused by intermodulation. You can use this function only while operating on the VHF/UHF band. 1 Enter Menu mode and access Menu 103 (VHF.AIP) and/or Menu 104 (UHF.AIP) {page 20}. 2 Set the AIP to ON or OFF. 68
![](/manual_guide/products/kenwood-tmv71a-operation-manual-c7a4adb/76.png)