Kenwood TM-V71A Operation Manual - Page 48
Storing Data In Pm Channels, Recalling Pm Channels
![]() |
View all Kenwood TM-V71A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
STORING DATA IN PM CHANNELS 1 Confirm that the following conditions have been satisfied: • The transceiver is in receive mode. • Scan is not being used. • Microphone Control is OFF. 2 Configure the transceiver with your desired settings. 3 Press [F], [PM]. • PM channel numbers 1 to 5 appear and blink at the bottom of the display. 4 Enter a channel number ([1] to [5]) corresponding to your desired PM channel. • The settings are stored in the PM channel. RECALLING PM CHANNELS 1 Press [PM]. • PM channel numbers 1 to 5 and OFF appear on the bottom of the display. 2 Enter a channel number ([1] to [5]) corresponding to your desired PM channel. • The settings stored in the PM channel are recalled. • The selected channel number appears on the display. • When selecting [OFF], the PM channels turn off. 40
![](/manual_guide/products/kenwood-tmv71a-operation-manual-c7a4adb/48.png)