Kenwood TM-V71A Operation Manual - Page 59
Ctcss Frequency Id
View all Kenwood TM-V71A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
CTCSS FREQUENCY ID This function scans through all CTCSS frequencies to identify the incoming CTCSS frequency on a received signal. You may find this useful when you cannot recall the CTCSS frequency that the other persons in your group are using. 1 Press [TONE] 2 times to activate the CTCSS function. • The icon appears on the display when the CTCSS function is ON. • Each press of [TONE] changes the selection as follows: Tone (T) -> CTCSS (CT) -> DCS (DCS) -> Off (no display). 2 Press [F], [TONE] (1s). • The icon blinks and "SCAN" appears on the display. • Scan starts when a signal is received. • To reverse the scan direction, turn the Tuning control clockwise (upward scan) or counterclockwise (downward scan). You can also press microphone [UP]/ [DWN]. • To quit the scan, press [F] (ESC). • When a CTCSS frequency is identified, the identified frequency appears on the display and blinks. 3 Press the Tuning control to program the identified frequency in place of the currently set CTCSS frequency. • The CTCSS function will remain ON. To cancel CTCSS, press [TONE] until CT no longer appears on the display. • Press [F] (ESC) if you do not want to program the identified frequency. • Rotate the Tuning control while an identified frequency is blinking, to resume scanning. 51