Kenwood TM-V71A Operation Manual - Page 82
Microphone Sensitivity, Power On Password
View all Kenwood TM-V71A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
MICROPHONE SENSITIVITY The input level to the microphone can be configured. 1 Enter Menu mode and access Menu 111 (M.SENS) {page 20}. 2 Set the Microphone Sensitivity to HIGH, MEDIUM or LOW. Note: The higher the input level to the microphone is configured, the easier to gain the surrounded sounds. POWER ON PASSWORD If power on password is activated, you cannot operate the transceiver without first entering your password, after turning the transceiver power ON. Your password can be changed using the MCP-2A software, and can contain up to 6 digits. 1 Enter Menu mode and access Menu 998 (PASSWD) {page 20}. 2 Set the power on password to ON or OFF. • When set to ON, "PASSWD" appears on the display. 3 Enter your password. [F]: 1 [TONE]: 2 [REV]: 3 [LOW]: 4 [PF1]: 5 4 After entering up to 6 digits, press the Tuning control to set the password. Note: Even with Menu 998 turned ON, the power on password function will not be activated unless you first program a password using the MCP-2A software. 74