Kenwood TM-V71A Operation Manual - Page 43
Clearing A Memory Channel, Naming A Memory Channel
![]() |
View all Kenwood TM-V71A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
• When the recalled memory channel is an AM channel, you cannot recall on the B band. CLEARING A MEMORY CHANNEL 1 Press [MR] to enter Memory Recall mode. 2 Rotate the Tuning control to select your desired Memory channel. • Additionally, you can press the microphone [UP]/[DWN] keys to select a channel, or you can enter a channel number using the microphone keypad. 3 Turn the transceiver power OFF. 4 Press [MR] + Power ON. • A confirmation message appears on the display. 5 Press the Tuning control to clear the Memory channel. • To exit without clearing the channel, press [F] (ESC). NAMING A MEMORY CHANNEL You can name Memory channels using up to 6 alphanumeric characters. When you recall a named Memory channel, its name appears on the display instead of the stored frequency. Names can be call signs, repeater names, cities, people, etc. 1 Press [MR] to enter Memory Recall mode. 2 Rotate the Tuning control to select your desired Memory channel. 3 Enter Menu mode and access Menu 200 (M.NAME) {page 20}. 4 Enter your desired name for the channel {page 24}. Note: You can overwrite a Memory channel name by performing the steps above. You can also clear a Memory channel name by clearing the Memory channel. 35
![](/manual_guide/products/kenwood-tmv71a-operation-manual-c7a4adb/43.png)