Kenwood TM-V71A Operation Manual - Page 87
Continuous Recording
View all Kenwood TM-V71A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
■ Continuous Recording Received signals on the control band are continuously recorded, with the memory retaining the last 30 seconds of recorded signals. 1 Enter Menu mode and access Menu 009 (CON.REC) {page 20}. 2 Set the Continuous Recording to ON (or OFF). • When selecting "ON", Continuous Recording turns ON. When the control band squelch opens, the icon appears on the display and Received signals are recorded. • Received signals are saved in the SRAM memory. 3 Press the PF key programmed as [VGS]. 4 Press [LOW] (4) (1s). • Up to 30 seconds of received signal recordings from the SRAM memory are written to channel 4. Note: The icon does not appear during playback, in Repeater mode, or in Remote Control mode. 79
79
■
Continuous Recording
Received signals on the control band are continuously recorded, with the
memory retaining the last 30 seconds of recorded signals.
1
Enter Menu mode and access Menu 009 (CON.REC) {page 20}.
2
Set the Continuous Recording to ON (or OFF).
•
When selecting “ON”, Continuous Recording turns ON. When the control band
squelch opens, the
icon appears on the display and Received signals are
recorded.
•
Received signals are saved in the SRAM memory.
3
Press the PF key programmed as
[VGS]
.
4
Press
[LOW] (4) (1s)
.
•
Up to 30 seconds of received signal recordings from the SRAM memory are
written to channel 4.
Note:
The
icon does not appear during playback, in Repeater mode, or in Remote Control
mode.